Sonnet Technologies Echo Express SE 10GbE User's Guide [Enghlish] - Manual (Page 10)

6
Chapter 5 – Basic Configuration Information
Figure 3
Listed below are the basic steps necessary to configure the
Echo adapter’s 10GbE adapter for use with your computer.
1. With the Echo adapter connected to your computer
and 10GbE infrastructure, open System Preferences, and
then click Network.
2. In the Network preferences panel, click the Echo
adapter’s 10GbE adapter (identified as Thunderbolt
Ethernet Slot x) in the left panel, and then configure
the settings.
3. When you’ve finished changing the settings, click
Apply. For additional information on configuring
settings, refer to Mac Help (Help > Mac Help from the
Finder) and www.apple.com/support; type “network,
ethernet” to display various articles.