Sonnet Technologies Echo Express III-R Mobile Rack Kit - Manual (Page 10)

15. Install the Echo Express III-R into its rack now.
16. Connect a Thunderbolt cable between either Thunderbolt port on
the Echo chassis and a Thunderbolt port on your computer (or other
Thunderbolt device in the chain connected to the computer). If you
are daisy chaining additional Thunderbolt devices, connect another
Thunderbolt cable between the downstream device and the open
Thunderbolt port on the Echo chassis
(Figure 6).
17. Using a Phillips screwdriver, secure the Thunderbolt cable(s) to
the Echo Express III-R with the supplied Thunderbolt cable lock
(Figure 6). Note that if you are using an optical Thunderbolt cable, the
supplied Thunderbolt cable lock is not compatible, and you should skip
to the next step.
18. Connect the included power cords between a wall outlet or power strip
and the Echo chassis’ power socket and the mobile rack kit’s power
socket. Note that the power indicator on the Echo Express III-R will not
light until the computer, and any other Thunderbolt device connected
between it and the Echo chassis, is powered on.
19. Connect interface cables between devices, PCIe cards, and computer as
necessary.
20. Return to Chapter 4 – Verify Connections Using System Information in the
Echo Express III-R User’s Guide to complete setup.
Chapter 3 – Mobile Rack Kit and Device Installation Steps
6
Figure 6