SKC Limited Universal Pump Step By Step Guide - Manual (Page 3)

www.skcltd.com 224-G3 Issue C Page 1
The Universal Air Sampling Pump
LCD display Air inlet hosetail
Inlet filter housing
Inlet filter
Inlet filter O ring
Filter housing
screws
Flow indicator*
Accessory mounting
screws
On/off switch
Flow adjust screw
Keypad cover
Keypad cover screw
Keypad
Battery pack
Belt clip
Charging jack socket
Battery pack screws
Low flow mode
screw cover
Exhaust port cover
Cover over low flow regulator
Model depicted - 224-PCTX8
Features vary by model
*The flow indicator is for use only to
identify changing flow conditions
during sampling, such as a reduction
in flow caused by a crimped tube. It
must not be used to calibrate the
sample flow rate.