Set up, Changing the digital output setting – Alpine DVD/VIDEO CD/ DVA-5205E User Manual

Page 32

Text mode
Original mode

SET UP

Changing the digital
output setting

Use the following procedure to set the
audio signal output from the DVA-5205E.

Changing the digital output setting

Select “DIGITAL OUT” under
“Changing the default settings
(SET UP)” on page 24.

Use the “Joystick” to make the
selection, then press “ENT”.

AUTO

LPCM

The digital output is switched automatically
according to the type of audio signals being
played.
Be sure to select “AUTO” when you want to
connect a digital audio processor and play
Dolby Digital audio. “AUTO” is selected upon
shipment from the factory.

The audio signals recorded on the disc are
converted into 48 kHz/16 bit (for DVDs) or 44.1
kHz (for video CDs and CDs) linear PCM audio
signals for output.

ENT

DISP

SET

BAND

RTN

V.OUT