A&D Precision Health Scale UC-321PBT-C - Manual (Page 5)

4
Pairing The PBT-C Series Device With a Continua-Compliant Manager
Model UC-321PBT-C is a PBT-C series device. PBT-C series devices are
designed to be connected only with Continua Managers.
To pair the device with a Manager, please follow these steps:
1. Remove the four AA batteries from the device.
2. Discharge the device completely by trying to take a measurement. Press the
“Measurement” switch, tap the toe switch, or tap the surface of the device as
appropriate.
Note: the measurement will not proceed and the LCD will remain blank.
3. Insert the four AA batteries back into the device.
4. Refer to the Manager’s instruction manual to start a Bluetooth discovery and
inquiry process.
The device will stay discoverable for 60 seconds following battery insertion.
If the Manager fails to pair with the device, repeat steps 1 through 3.
5. Once the manager has discovered the device, enter the PIN “123456” as a
password to finish the pairing process.
When the Manager supports SSP (Secure Simple Pairing), no password is
required for the pairing process.
A device that has been certified by Continua displays this
logo.
A Bluetooth device has the logo mark of Bluetooth printed
on it.
The RoHS (Restriction of Hazardous Substances)
Directive