SecurityMan Air-AlArm1 - User manual - Manual (Page 17)

keypad by pressing _esC/Disarm + programming password + eNt_, the alarm host will beep twice to indicate the indoor siren has been
successfully disarmed.
The light on the siren will flash 5 times to indicate the indoor siren has been successfully added.
•
To Cancel:
After connecting the siren to the power outlet, press and hold the “Learn” button located on the left side of the siren for 5 seconds, the light •
on the siren will flash once to indicate the indoor siren has been successfully cancelled.
Note: the alarm host can only learn 1 wireless device (indoor siren) at a time, multiple wireless sirens can be added to a host. When adding
or cancelling wireless sirens, only operate using the alarm host keypad; do not use the remote controllers to disarm in the process.
Wireless smoke Alarm (sm-93, optional)
functions/features:
Monitor and control indoor fire risks, for indoor use only, generally set as a 24 hour Defense Line. •
Replace the battery every 2 years (varies on usage). •
Usually installed to ceilings of living room, hallways, aisles, etc. •
14
Please use screw * (f) for mounting bracket (see page22)