SecurityMan Air-Alarm - Quick Start Guide User Manual
Page 2
Wireless Wide Angle PIR Motion Sensor (SM-80):
Mount the bracket to wall surface at least 6~7ft above the ground level. Secure the bracket with the 20mm screws.
Match the PIR sensor grooves to bracket & slide PIR sensor down from top to bottom to secure. Adjust sensor to proper angle.
Wireless Indoor Siren (SM-103W):
Plug in the Indoor Siren into an electrical wall outlet as illustrated below
:
Wireless Remote Controllers Installation (SM-88X):
Disarm – press to disarm the alarm
Away – press to arm (default dwell time is 40 seconds)
Home – press to arm the 1
st
defense line only (the perimeters of home commonly before going to sleep).
Emergency – press in case of panic or emergency to activate the sirens & auto dial to the enlisted numbers.
NOTE: Please reference Air-Alarm user’s manual for more details.
SecurityMan Inc.
2