Robinair 14450 Heat Gun - Manual (Page 2)

WARNING
.
• This tool emits high temperature heat at the nozzle. Keep hands and body out
of the heated air stream and never grasp the heat gun by the nozzle. Wearing
protective gloves and safety glasses is recommended.
• Never let the heat gun operate while unattended and unplug when not in use or
before servicing.
• Do not use the heat gun near combustible materials, fumes or vapors. Good
ventilation is always advised.
• Do not heat chemicals. Avoid the hazards of ignition or the release of harmful
vapors.
• Heat guns are equipped with a circular safety stand that should be used when
setting the tool down while operating or during the cool-down period. Never
store while hot.
• Do not use adaptors or modify the heat gun plug.
• Replace damaged cords immediately.
• Although the housing and handle of the heat gun are constructed of non-
conducting material, do not use in wet or damp areas. Never immerse gun in
water nor stand in water or wet areas while using gun.
• It is recommended to use the heat gun indoors only. Carefully check the flam-
mability of the material under the surface as well as the surrounding materials.
After use, make sure that the gun has not caused combustion/fire to start.
• Keep heat gun out of childrens reach and caution others of it’s extreme heat
capabilities.
• Check your electrical line and receptacle to make certain they are correct for
the voltage and amperage indicated on your heat gun. If an extension cord is
necessary, a minimum 14 gauge three-prong grounding type cord rated for
outdoor use should be used to prevent excessive voltage drop, loss of power or
overheating.
14450 Heat Gun