Audiovox Prestige P959ESP - Manual (Page 13)

128-6979
13 of 20
-13-
CD CH CD CH CD CH CD CH CD CH A A A A A NGER CONTR NGER CONTR NGER CONTR NGER CONTR NGER CONTROL OL OL OL OLS S S S S
Built into this radio are controls to operate an optional CD changer.
Please check with your Prestige/Audiovox car stereo specialist or call
1-800-645-4994 for recommendations of the models that will work
with this radio. Connection between the radio and CD changer is made
using the supplied ISO-to-DIN 8-pin adapter cable, Part Number
P956CDC.
dr
&
ds
DISC SELECT (CD-/CD+)
These buttons are used to select the desired disc for play. To advance
to a higher number disc, press the CD+ button ds
. To return to a lower
number disc, press the CD- button
dr
. The number of the disc in play
will be shown on the display panel. dt
TRACK SELECT ( / )
This button is used to quickly select the beginning of a particular track.
With each momentary press of the Forward Track Select button ( ),
the next higher track number will be selected as shown on the display
panel. Similarly, with each momentary press of the Backward Track
Select button (
), the next lower track number will be selected.
du
FOWARD/REVERSE SEARCH (CUE/REVIEW)
High-speed audible search to any forward or reverse section of the
disc can be made with this feature. Press and hold the forward (cue)
button ( ) to advance rapidly in the forward direction, or press
and hold the reverse (review) button ( ) to advance rapidly in the
reverse (backward) direction. In either case, the disc icon will rotate
faster when search is active.
el
TRACK SCAN SELECTOR (SCN)
When the SCN button is momentarily pressed, the SCN indication will
replace the CDC indication on the display panel, and the first 10 seconds
of each track on the disc will be played in order. When a desired track is
reached, press the SCN button again and play of the selected track will
continue (SCN will disappear from the display panel and CDC will
reappear). The Track Scan mode will also be canceled by activating
any other disc function (Track Select, Repeat or Random).
When the SCN button is pressed and held for more than 2 seconds,
the disc scan mode is activated; DSN will appear on the display and the
first 10 seconds of the first track on each disc will be played in disc
order. This mode is canceled in the same manner as before.
Once the changer is installed and properly connected, it may be
necessary to press the RESET button behind the radio front panel to
initialize the complete installation.
Adjustment of the audio functions (volume, tone, balance, and fader)
for the CD changer operate in the same manner as they do for radio
play. The following controls will operate the CD changer when it is
installed and connected to this radio. Refer to 128-6980 for specific
wiring instructions for an optional CD changer; also refer to the owner’s
manual included with the CD changer for instructions on the installation
and correct loading and use of the CD magazine.
dq
CD CHANGER PAUSE/PLAY SELECTOR ( PAU )
During radio, or CD player operation, press the MODE button to select
operation of the CD changer. CDC will appear, disc play will begin, the
disc and track number will be shown on the display panel, and the disc
icon ( ) will become animated. If a new magazine has been loaded
into the changer, play will begin from the first track of the first disc in the
magazine. If a magazine was already in the changer, play will resume
from the track on the disc previously in play.
During CD changer play, pressing the PAU button once will stop changer
play; PAUSE will appear on the display and the disc icon will remain
stationary. To resume disc play, press the PAU button again and disc
play will resume from the point at which it was interrupted.