Ransburg Vector_Solo Technical Manual - Manual (Page 13)

For most economical and efficient coating, trig-
ger applicator "ON" just before leading edge of
object, trigger applicator "OFF" just after trailing
edge of target. For best wraparound technique,
trigger applicator "ON" 3-inches before, and "OFF"
3-inches after edges of target.
When painting large objects a section at a time,
use "feather" stroke for blending sections together.
Avoid excessive overlap to prevent runs and sags
with excessive film thickness.
Tubular component coating; adjust fan width for
a pattern slightly wider than the object, hold ap-
plicator 10 to 12-inches from object at an angle
of 30 to 45- inches. Move applicator straight in a
parallel path with the object.
Paint "hard to reach" areas first, let wraparound
and electrostatic attraction get the "easy" areas
for you.
5
6
7
8
ON OFF
Vector/Solo Applicators Spray Techniques
10
Ransburg
IL-246-C