Avanti INSTRUCTION MANUAL CK302R - Manual (Page 7)

7
Refrigerator Section
 2
wire shelves
 1 crisper with glass lid
 Instruction
Manual
INSTALLATION INSTRUCTIONS
 Before Using Your Compact kitchen
 Remove the exterior and interior packing.
 Check to be sure you have all of the following parts:
Kitchen Section
 2 Wire Shelves
 Faucet
Set
 Strainer
 Strainer
Plug
 Backsplash and Assembly Screws (Only for model CK30-1)
 Instruction
Manual
 Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 Energy Saving Tips
 The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
 Installation of Your Compact Kitchen
NOTE:
1. In order to remove crisper and/or shelves of refrigerator, a clearance A of
10 inches is required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet.
Figure No. 1