Avanti CHAIR - Manual (Page 5)

Page 5 March 2005 Revision B
The Avanti can be opened by the following sequence of operations.
• Remove chair from packing using seat handle.
• Lift push handle.
• Lock backrest and push handle into position by pulling cable up and locating
pins in hinge bracket. Take care when locking into position.
• Ensure that quarter turn latch pin locates in to the tube.
Pin located in
locked position
in hinge bracket.
• Apply Brake.
• Place footrest in forward position.
• Place one armrest into bottom position.
• User access chair via side.
• Place remaining armrest into bottom position.
• Engage lap strap.
The chair can be opened easily with practice. Do not put fingers inside the structure
when it is being opened and locked out.
ENSURE THAT BACKREST LOCK IS FULLY ENGAGED BEFORE USING
OCCUPANT TO BE SUPERVISED AT ALL TIMES
Quarter
Turn Latch.