Amana ADB-2 - Manual (Page 9)

8
* Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization.
Options
OPTION DESCRIPTION USE WITH CYCLES
Sanitize
(select models)
Hi Temp
Wash
Heated Dry
Sanitizes dishware. When the cycle monitor recognizes that Heavy Wash*
proper conditions have been met, a Sanitized light will activate Normal Wash*
at the end of the cycle. Sanitization may not be achieved if Quick Wash*
there is an interruption of the cycle, power failure or if the Auto Wash*
incoming water temperature is below 120° F (49° C). (select models)
Hi Temp Wash provides additional heat during the wash portion
of the cycle, which ensures proper water temperature for better
All cycles
cleaning and drying results. It also adds an additional rinse to (except Rinse Only)
the cycle which improves results in hard water situations. (select models)
For enhanced drying results select this option. When Heated
Dry is not selected, towel drying of some items such as plastic
and items with non-stick surfaces may be necessary and more
All cycles
moisture may be noticed adhering to the dishwasher interior. (except Rinse Only)
In models with plastic interiors, it is normal to notice vapor (select models)
escaping from the door vent as the heat dries your dishes.
Vapor will escape even if Heated Dry is not selected.
Used to automatically start the cycle at a later time. See All Cycles
page 10 for instructions.
In addition to choosing a cycle from page 7, choose as many available options as are needed for your dishload.
CAUTION – In models with plastic interiors, it is normal to notice vapor escaping from the door vent in the upper left corner
of the door as the heat dries your dishes. The vapor is hot and may cause minor burns.
CAUTION
Cycles, Options and Lights
Delay