Addonics Technologies Mobile DVD/CDRW - Manual (Page 6)

Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0 5
* Note – Before you start
♦
For Firewire DVD/CDRW, Since some notebook computers
comes only with Four Pin Firewire port on the computer, they can
use the BUILT-IN Daisy chain port on
Addonics Firewire cable to
connect their Four to Six pin Male firewire cable.
♦
This Drive will only work as a CDRW drive under WIN NT and needs
to be set in PCMCIA MODE.
Fire wire Cable Installation
Attach the FIREWIRE-IDE cable’s “MC 36 Connector” (Picture 1) to your
Addonics Mobile Drive firm and securely – you should not be able to
disconnect the cable without pressing the release notch.
Picture 1
***Users can connect their Six Pin Firewire Cable
Into the Daisy Chain Port to use the Drive as well. ***
Power
Switch
AC/DC
Adapter
Input Jack
MC-36
Connector
Diagram 2