Amana Quiet Zone 5M11TB - Manual (Page 4)

4
DELAY START OPERATION
Procedure Display Indicator
2 Press the DELAY
TIMER button.
Select the desired
temperature,
operating mode, and
fan speed.
3
Turn the unit off.
1
4
Press the DELAY
TIMER button.
Change the delay
time, if desired. 5
• The current temperature setting will flash.
• Display and selected setting lights will flash.
The display will show the current temperature
setting.
• The current delay time will flash.
6 Press the DELAY
TIMER button to start
the time or select
nothing and the unit
will start automati-
cally.
Button
Note: Changes can be made only while display is flashing. You will have 5 seconds between each temperature,
operating mode, and fan speed selection. If a selection is not made during this time frame, the unit will select the default
and proceed to the next step: Setting the delay time. If you wish to reset a missed selection, press the DELAY TIMER
button and begin again.
Note: The minimum setting for the timer is 1 hour
• The display will show the countdown time to
activation.
up to