Asus INTEL TUSL2-M - Manual (Page 21)

ASUS TUSL2-M User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
WARNING! Using a higher voltage may help when overclocking but may result
in the shortening of your computer component’s life. It is highly recommended
that you leave this setting on its default.
6) Keyboard Power Up (KBPWR)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing ) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead. The default is set to Enable. Your
computer will not power ON if you set this to Enable but do not have the appropriate
ATX power supply. NOTE: This jumper must be set in conjunction with Wake
On PS2 KB/PS2 Mouse/CIR in 4.5.1 Power Up Control.
Setting KBPWR
Enable [1-2] (default)
Disable [2-3]
TUSL2-M
®
TUSL2-M Keyboard Power Setting
Enable
(default)
Disable
1 2 2 3
KBPWR