Elite Screens WhiteBoardScreen Universal - Manual (Page 2)

1
Parts List for WhiteBoardScreen Universal
Please make sure all parts listed are included before proceeding with installation
a b c d e
f g h i
Installation
1. Mark the location the WhiteBoardS creen Universal will be installed and drill your
holes for all of the Top Hanging Brackets (d ). Once the holes have been drilled, insert
and screw the wall screws (a) as shown below. It is strongly recommended to install
the WhiteBoardScreen Universal on wood studs for added stability. If the location does
not have wood studs, then use the included ho llow wall (drywall) anchors (c).
Parts List QTY
a. Wall screws 12
b. Bottom hanging brackets 2
c. Hollow wall (drywall) anchors 12
d. Top hanging brackets 2
e. Eraser 2
f. Dry-erase markers 2
g. Cleaning solution 1
h. M3 Philip screws 3
i. Tray 1
Note: The WhiteBoardScreen Universal
Series eraser should only be used for the
Elite Screens Whiteboard .