Electronics International CA-1 - Manual (Page 20)

"Brown" Pair
Red
Black
Wht/Violet
Wht/Gray
Wht/Org
Instrument
Back Panel
E-1 or C-1 Additional Connections
A-1 or CA-1 Additional Connections
EC-1 Additional Connections
EC-2 Additional Connections
"Brown" Pair
"Orange" Pair
EAC-1 Additional Connections
E-4, C-4, E-6 or C-6 Additional Connections
All Instruments
Instrument Wiring Diagram
Connects To:
12/24 Volt Bus. via 1 amp fuse.
Ground
12 Volt Bus (open for a 24V system).
24 Volt Bus (Gnd for a 12V system).
Panel Light Rheostat (an open line will
cause the light to be at full intensity).
Description:
Power Lead
Ground Lead
12V Back Light
24V Back Light
Controls Ice Zone
Warning Light intensity
E-2 or C-2 Additional Connections
To Left Probe.
To Right Probe.
To Temp. Probe.
Connector marked "OAT" to OAT Probe.
Connector marked "Carb" to Carb. probe.
To EGT Probe.
To CHT Probe.
To Left EGT Probe.
To Right EGT Probe.
To Left CHT Probe.
To Right CHT Probe.
To EGT Probe.
Connector marked "OAT" to OAT Probe.
To CHT Probe.
To Cyl. #1.
To Cyl. #2.
To Cyl. #3.
To Cyl. #4.
To Cyl. #5 (E-6 or C-6 only).
To Cyl. #6 (E-6 or C-6 only).
"Brown" Pair
"Red Stripe" Pair
"Brown" Pair
"Red Stripe" Pair
"Orange" Pair
"Yellow" Pair
"Brown" Pair
"Red Stripe" Pair
"Orange" Pair
"Yellow" Pair
"Green" Pair
"Blue" Pair
"Brown" Pair
"Red Stripe" Pair