World Dryer AirStyle B - Manual (Page 2)

2
Description
World Dryer AirStyle surface mounted and recessed mounted warm air hair dryer, powered by a high speed universal motor,
delivering 2300 Watts of drying power. This hair dryer runs on 115 Volts AC, 208/220-240 Volts AC, or 277 volts AC electrical supply,
depending on model. Push-button models are represented in this product group. This appliance is intended for hair drying. This hair
dryer may be used in schools, clubs and public facility environments.
(cULus Listed, E19860, CE TUV-GS)
General Safety Information
DANGER
• Always disconnect the power source before servicing or installing the hair dryer.
DANGER
dryer’s wall base.
• We recommend GFCI protection in wet or damp locations or as required by local code.
WARNING
• Connect the hand dryer to the nearest suitable distribution panel.
• Do not connect to a branch circuit with CB or fuse protection over 20 Amps. This is in compliance with The National Electrical Code.
.
CAUTION
Improper mounting could result in personal injury or property damage.
Unpacking
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hair dryer from the shipping carton, using care not to drop the appliance.
3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. If the hair
dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Basic Models Nozzle Drying Cycle Dimensions (WxDxH) Weight Cover Material
RB Rotating Nozzle 80 Seconds 13.1” x 13.8” x 4” 333 mm x 351 mm x 102 mm 28.6 lbs / 12.9 kgs Cast Iron
B Rotating Nozzle 80 Seconds 11.3” x 9.6” x 8.1” 287 mm x 244 mm x 206 mm 27.3 lbs / 12.4 kgs Cast Iron
DB Rotating Nozzle 80 Seconds 11.3” x 9.6” x 8.1” 287 mm x 244 mm x 206 mm 15.6 lbs / 7.1 kgs Steel
Failure to disconnect the power source before installation or servicing can
result in serious injury or death from electric shock.
Failure to properly ground this unit could result in severe electrical shock
and/or death.
NEC codes or safety recommendations are not followed.
Models Type Electrical Input Amperage Watts
B, RB, DB Push-button 110-120 V, 60 Hz 20 2300
B1, RB1, DB1 Push-button 110-120 V, 60 Hz 15 1725
B3, RB3, DB3 Push-button 208-240 V, 60 Hz 10 2300
B7, RB7, DB7 Push-button 277 V, 60 Hz 8.5 2300
B38, RB38, DB38 Push-button 220-240 V, 50 Hz 10 2300