Ipx1 – World Dryer XRA User Manual
Page 2
![background image](/manuals/345795/2/background.png)
5700 McDermott Drive
Berkeley, IL 60163 U.S.A.
800-323-0701
www.worlddryer.com
92-MT041 Rev06
Certification Approved
Warranty
Recess Mounted
Placement Instruction
• Hand dryers should be spaced at least 2’ apart, near but not over the wash basin
• Automatic dryers should be located more than 18” above or away from any
reflective surface that may interfere with the sensor operation.
• In congested areas, dryers should be located to create a flow from wash basin to
dryer to exit
• Dryer Quantity Recommendation:
Average Traffic: 1 dryer per 2 wash basins
Heavy Traffic: 1 dryer per wash basin
Industrial 54” Circular wash fountains: 4 dryers per sink
• Recommended mounting heights from floor to dryer bottom edge
Installation Guide
• Model XRA hand dryers require a dedicated 20 AMP circuit and must be properly
grounded
• GFI circuit protection is recommended.
• One side of dryer should be mounted to a stud
Men’s washrooms
42” (107 cm)
Women’s washrooms
40” (102 cm)
Children’s washrooms, ages 4-7
28” (71 cm)
Children’s washrooms, ages 7-10
32” (81 cm)
Children’s washrooms, ages 10-13
36” (91 cm)
Children’s washrooms, ages 13-17
40” (102 cm)
Handicap Mounting Height
34” (86 cm)
IPX1
10 year limited warranty
5 year on sensor
13.9
(353 mm)
12.8 (325 mm)
13.1 (333 mm)
12.1 (307 mm)
TYPICAL
OPENING
8 KNOCKOUTS 7/8" (22 mm) &
1 1/8" (29 mm) FOR CONDUIT
8 HOLES 13/64" (5 mm)
FOR MOUNTING
12.5"
(315 mm)
11.75"
(300 mm)
(32mm)
1.25"
(76mm)
3"
Recess Mounted
Unit with ADA
Compliant Q Nozzle
4"
(100 mm)
3.5"
(89mm)
2.25"
(57mm)
FLOOR LINE
Front View Wall Box Mounting
Side View
Measured from floor to the bottom of the unit.