SAF Tehnika CFIP PhoeniX and PhoeniX M ETSI V1.3 - Manual

© SAF Tehnika JSC
Ver. 1.3, 2012 March
CFIP PhoeniX series
Hybrid split mount system
Table of Contents
CFIP PhoeniX IDU Technical Specification ......................................................... 1
CFIP PhoeniX M IDU Technical Specification ..................................................... 3
CFIP PhoeniX ODU ........................................................................................ 5
CFIP PhoeniX M ODU .................................................................................... 8
CFIP PhoeniX IDU Technical Specification
Modem
Channel Bandwidths 3.5, 7, 14, 28, 40, 56 MHz
Modulations QPSK, 16APSK, 32APSK, 64QAM, 128QAM, 256QAM
Capacity 9 - 366 Mbps
Supported ODUs CFIP ODU
Applications
Configuration
1+0, 1+1 (HSB, SD, FD),
Ring/Mesh (with RSTP),
2+0, 3+0, 4+0 (built-in Ethernet aggregation)
Protection switching Hot Stand-by (<50ms), Space/Frequency diversity (hitless, errorless)
Ports
Ethernet 4x1000Base-T, RJ-45
E1/T1 20 E1/T1, RJ-45
Serial port for configuration RS-232, DB-9 connector
Alarm port 4 digital inputs, 4 relay outputs (26 pin hi-density D-SUB)
ODU port N-Type Female
EOW port 3.5mm headset and mic, 64 Kbps
Extension/protection port RJ-45
DC power connector 2ESDV-02 with screw locks
Grounding screw
N-Type female
to ODU
DC port
Management port
(RS-232 interface)
Auxiliary alarm
interface
4x1000Base-T user
data and
management ports
20 E1/T1
channel ports
EOW interface
Alarm LEDs
Extension port