Bosch MSM66155 Mixeur plongeant blanc gris - Manual (Page 7)

Robert Bosch Hausgeräte GmbH 7
Caution!
Before cutting meat, remove gristle, bones
and sinews.
The universal cutter is not suitable for cutting
very hard items (coffee beans, radishes,
nutmeg) and frozen food (fruit, etc.).
Fig. 

Place the universal cutter on a smooth,
clean work surface and press.

Insert the blade.
 Add food.
Warning!
Blade must sit straight in the universal
cutter so that the attachment sits correctly
(Fig.=

-3).
 Place the attachment on the universal
cutter and rotate in a clockwise direction
until it “clicks” into position.
 Place the base unit on the attachment
and lock into position.

Insert the mains plug.

Hold the base unit and universal cutter
firmly and switch on the appliance (Turbo
speed).

Release the On button after processing.
After using the appliance
 Remove mains plug.
 Press the release buttons and remove
the base unit from the attachment.

Rotate the attachment in an anti-
clockwise direction and remove from the
universal cutter.

Take hold of the blade by the plastic
handle and take out.

Place the lid on the universal cutter to
keep in the processed ingredients.
Cleaning
Warning!
Never immerse the attachment of the uni-
versal cutter in liquids and do not clean under
flowing water or in the dishwasher.

Universal cutter and blade are
dishwasher-proof.

Wipe the attachment with a damp cloth
only.
Whisk
Please fold out the illustrated pages.
Fig. 
5 Gear attachment for whisk
6 Whisk
A whisk can be ordered from customer service
(order no. 657379).
Operation
The whisk is suitable for whipping cream,
beating egg whites and milk froth (from hot
(max. 70 °C) and cold milk (max. 8 °C))
as well as for preparing sauces and desserts.
Risk of scalding!
When processing hot milk, use a tall, narrow
receptacle for blending. Hot milk may splash
and scald you.
Fig. 

Put ingredients into the blender jug.

Place the gear attachment on the base
unit and lock into position.
 Insert the whisk into the gear attachment
and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment (Fig.=

-3).

Set required speed using the speed
control (if fitted) (recommendation:
high speed).

Grip base unit and blender jug and press
required On button.
 Release the On button after processing.
After using the appliance
 Remove mains plug.
 Press the release buttons and remove
the base unit from the gear attachment.

Remove the whisk from the gear
attachment.
Cleaning
Warning!
Never immerse the gear attachment in liquids
and do not clean under flowing water or in the
dishwasher.

The whisk can be cleaned in the
dishwasher.

Wipe the gear attachment with a damp
cloth only.
en