Bosch MFQ4070 Batteur blanc argent - Manual (Page 6)

6 Robert Bosch Hausgeräte GmbH
For your safety
This accessory is designed for the hand mixer MFQ4... .
Follow the Instructions for Use for the hand mixer.
Do not attach or remove hand mixer until the appliance
is at a standstill.
The accessories are suitable only for the use described in these
instructions.
, Safety instructions for this appliance
Risk of electric shock!
Do not immerse the appliance in liquid above the joint between
the high-speed hand blender and base unit.
Risk of injury from sharp blade/rotating drive!
Never grip the blade in the universal cutter. Never clean cutting blade
with bare hands. Use a brush.
Take hold of the cutter blade by the plastic handle only.
Never grip the blade on the high-speed hand blender.
Never clean the hand blender blade with bare hands. Use a brush.
Risk of scalding!
Caution when processing hot liquids. Liquids may splash during
processing.
Before using the high-speed hand blender in a cooking pot, take
the pot off the hotplate.
Important!
Do not attach or remove accessories until the appliance
is at a standstill.
The universal cutter must be completely assembled before use.
Never use the high-speed hand blender in the universal cutter jug.
The universal cutter jug is not microwave-safe.
Never immerse the attachment of the universal cutter in liquids and
do not clean under flowing water or in the dishwasher.
Before use, read these instructions carefully
in order to become familiar with important
safety and operating instructions for this
appliance.
Please keep the operating instructions
in a safe place.
If passing on the appliance to a third party,
always include the operating instructions.
On account of the different models,
it is possible that not all accessories
are included in your set.
These are also available separately from
customer service.

Before using the appliance for the first
time, clean all parts of it.
en
Important information
When the rear aperture is open, the appli-
ance can be operated using instanta-
neous switching only.
Selector switch 1–5 will not function.
Move slide for actuating the lock in switch
position 0/off only.