Antec VSK2450 - Manual (Page 3)

2
VSK‐2450 U
SER
’
S
M
ANUAL
At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible
that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s
simply an improvement. As of the date of publication, all features, descriptions, and illustrations in
this manual are correct.
Disclaimer
This manual is intended only as a guide for Antec’s computer enclosures. For more comprehensive
instructions on installing the motherboard and peripherals, please refer to the user’s manuals that
come with those components.
The VSK‐2450 is powered by a VP450 power supply.
A variety of industrial‐grade safety circuitry will
help protect your computer: OVP (Over Voltage Protection), SCP (Short Circuit Protection) and OCP
(Over Current Protection). Sometimes the PSU will “latch” into a protected shutdown state. This
means that you will need to power off the power supply and clear the fault before it will function
again.
There are no user‐replaceable fuses in either the VP450 or VP450P.
Although care has been taken to prevent sharp edges in your Antec case, we strongly recommend
taking the appropriate time and care when working with it. Avoid hurried or careless motions. Please
use reasonable precaution.
This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult your
motherboard user’s manual for specific mounting instructions and troubleshooting. Before
proceeding, check the manual for your CPU cooler to find out if there are steps you must take before
installing the motherboard. While installing hardware, keep your case on a flat, stable surface.