American Dryer Corp. AD-81 II - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
* Refer to Electrical Service Specifications chart on page 21.
IMPORTANT: Steam dryers must be provided with a clean, dry, and regulated 80 PSI +/- 10 PSI
(5.51 bars +/- 0.68 bars) air supply. Air volume requirement is 0.75 cfh (cubic feet
per hour) - 0.02 cmh (cubic meters per hour).
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1/2 HP 0.373 kw
BLOWER MOTOR 3 HP 2.238 kw
DOOR OPENING (DIAMETER) 21-1/2” 54.61 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu. m.
DRYERS PER 20'/40' CONTAINER 10/20
DRYERS PER 48'/53' TRUCK 24/26
VOLTAGE AVAILABLE* 208-460v 3ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 756 lbs 342.9 kg
APPROX. WEIGHT (CRATED) 806 lbs 365.6 kg
HEAT INPUT 270,000 btu/hr 68,040 kcal/hr
AIRFLOW 1,700 cfm 48.14 cmm
INLET PIPE SIZE 1” F.P.T.
VOLTAGE AVAILABLE* 208-460v 3ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 789 lbs 357.9 kg
APPROX. WEIGHT (CRATED) 839 lbs 380.6 kg
AIRFLOW 1,700 cfm 48.14 cmm
AIR VOLUME 0.75 cfh 0.02 cmh
AIR CONNECTION 1/8” F.P.T.
STEAM CONSUMPTION
BOILER HP
NORMAL LOAD
375 lbs/hr 170.5 kg/hr 11
OPERATING STEAM PRESSURE STEAM SUPPLY STEAM RETURN
125 PSI max 8.6 bars 1” N.P.T. 1” N.P.T.
Shaded areas are stated in metric equivalents
Gas
Steam