QLogic 5800V_5802V - Manual (Page 6)

50902-00 Rev. h 01/13 6
Data Sheet
Fibre Channel Specifications
Fibre Channel Protocols
• Physical Interface (FC-PI-3)
• Line Services (FC-LS)
• Framing and Signaling (FC-FS-2)
• Generic Services (FC-GS/FC-GS-2/FC-GS-3/FCGS-4/
FC-GS-5) except for enhanced zoning
• Switch Fabric (FC-SW-2/FC-SW-3/FC-SW-4)
• arbitrated Loop Rev. 4.6 (FC-aL)
• arbitrated Loop-2 Rev. 7.0 (FC-aL-2)
• Fibre Loop attachment (FC-FLa)
• tape technical Report (FC-tape)
• Virtual Interface architecture Mapping (FC-VI)
• Fabric element MIB Specification (RFC 2837)
• Fibre alliance MIB Specification (Version 4.0)
• Methodologies for Interconnects (FC-MI-2)
• Device attach (FC-Da; Security Protocols (FC-SP)
Fibre Channel Classes of Service
• Class 2, Class 3, and Class F (inter-switch frames)
connectionless
Modes of Operation
• Fabric, public loop, broadcast
Scalability
Ports Per Chassis
• eight to twenty 8Gbps ports (upgradable in 4-port
increments)
• Four 10/20Gbps XPaK MSa-compliant ports (10Gbps
default; upgradable to 20Gbps)
Multiswitch Fabric Support
• all topologies including stack, cascade, cascaded loop,
and mesh
• Multiple 10/20Gbps or 8Gbps links
• adaptive trunking and intelligent path selection
Port Types
• all ports are universal, auto-discovering, self-
configuring, and assume the following states: F_Port,
FL_port, e_port, G_Port, GL_Port, tR_Port
Performance Features
Fabric Port Speeds
• 2/4/8Gbps, 10/20Gbps full duplex. all ports auto
negotiate with slower devices or ports
• Fabric latency less than 0.2µs
• Cut-through routing
Fabric Point-to-Point Bandwidth
• 1700MBps full duplex on 8Gbps ports
• 5100MBps full duplex on 20Gbps ports
Aggregate Bandwidth
• 544Gbps per chassis; nonblocking architecture
Maximum Frame Sizes
• 2,148 bytes (2,112 byte payload)
Per-port Buffering
• aSIC-embedded memory (nonshared)
• Guaranteed 16-credit, multiread port buffer, up to
13km at 2Gbps, and 2km at 10Gbps
• extended distance through credit donation
Media
• hot-pluggable, industry-standard 3.3V SFP+
transceivers for 8Gbps ports
• hot-pluggable, industry-standard XPaK optics or
copper stacking cables for 10/20Gbps ports
• Compatible with 4Gbps and 2Gbps SFPs
Supported SFP Types
• Shortwave/longwave (optical) and active copper
Maximum Media Transmission Ranges
• Device ports (2Gbps)
– Shortwave optical: 500m (1,640ft.)
– Longwave optical: 10km (6.2mi.)
• Stacking ports (10Gbps)
– Shortwave optical: 300m (984ft.)
– Longwave optical: 2km (1.2mi.)
Cable Types
• 50/62.5 micron multimode fiber optic
• 9 micron single-mode fiber optic
Interoperability
• Compatible with FC-SW-2 compliant switches
including Brocade
® , Cisco ® , and McData ®
• Interoperable with leading SaN management
applications
Fabric Management
Management Methods
• Quicktools Web applet
• CLI
• enterprise Fabric Suite (optional)
• aPI, GS-4 Management Server (including FDMI), SNMP,
RaDIUS, FtP, tFtP, and SMI-S
Access Methods
• 10/100 ethernet Baset (RJ45), serial port (RS-232
with DB9), and inband (Fibre Channel)
Diagnostics
• Power-on self test (POSt)
• Optional SaNdoctor fabric diagnostics software
Fabric Services
• Simple name server, hardware-based zoning, RSCN,
I/O StreamGuard, multichassis in-order delivery,
automatic path selection, FDMI, NPIV support, and
IPv6 support
User interface
• LeDs, command line console, and Web utilities
Mechanical/Power/Cooling
• 5802V: Dual, hot-swap power supplies/fans
5800V: Single integrated power supply
• Optional rail mount kit
• Front-to-back air flow
• RohS compliant
Dimensions
• h×W×D: 43.2Ч432Ч500mm (1.7Ч17Ч20in)
Weight
• 5802V: 8.16kg (18lbs)
• 5800V: 6.8kg (15lbs)
Environmental and Equipment Specifications
Operating
• temperature: 5°–40°C (41°–104°F)
• humidity: 10–90% noncondensing
• altitude: 0–10,000 feet
• Vibration: 5–500hz, 0.27g, 5 sweeps
• Shock: 3.5g, 3ms, half sine, 20 repetitions
Nonoperating
• temperature: –20°–70°C (-4–158 °F)
• humidity: 10–95% noncondensing
• altitude: 0–50,000 feet
• Vibration: 2–200hz, 0.5g, 5 sweeps
• Shock: 50g, 4,216 mmps, 13msec, 3 axis
Electrical
• Voltage: 100–240VaC; 50–60hz
• Power load: 1a at 120VaC; 0.5a at 240VaC
• Power consumption:
– 5802V: 80W nominal; 90W typical maximum
– 5800V: 73W nominal; 83W typical maximum
Agency Approvals—Product Safety
• US/Canada: UL/cUL, 60950-1
• europe: eN60950, CB Scheme-IeC 60950-1, Ce, tUV,
Low Voltage Directive
• Russia: GOSt R
Agency Approvals—EMI/EMC
• Meets Class a emissions and immunity requirements
for USa, Canada, europe, australia, New Zealand,
Korea, and Japan