PSA PANQ916K, Q916K/SP - Manual (Page 7)

7
ID Setting
Behind each station is a rotary ID dial. Each station must be addressed to a
specific and unique ID setting.
Room Stations.
Each Room Station is required to be configured to its unique station ID address.
Each room station must have a different ID to each other. Gently turn the dial with
a fine blade screw driver with the arrow pointing to the ID number as tabled below.
Maximum number of internal room stations allowed is sixteen.
Door Stations.
If more than one Door Station is installed, set the second (secondary or back door)
door station to its correct ID setting (F). The first (primary or front door) Door station
(E) can operate the door latch at all times. The secondary door station can only
operate an electric latch when it is in communication mode.
Turning the dial with excessive force will cause damage and void warranty.
Station ID Setting
Master 0
Room 1~9, A~F
Door (Primary) E
Door (Secondary) F
For Example:
Master Station First Room station Primary/Front Door