Troubleshooting and faqs – PROLiNK Hurricane 9000_B User Manual
Page 18

1 8
5. Troubleshooting and FAQs
Section Five: Troubleshooting and FAQs
5.1
There is no light for Power LED. (No Power)
1) Please check Power Switch whether it switches on.
2) Please check the Power plug
5.2
Power LED and LAN LED light up, but the ADSL Link LED
keeps blinking . (No ADSL Signal)
1) Ensure that the ADSL line is activated.
2) Check that the Telephone cable (RJ-11) is connected to
LINE Jack on your modem.
3) Try to turn off the modem, wait for at lease ten seconds,
then turn on again.
4) Try to take out all telephones connected to the ADSL line for
testing.
If the problem still persists, please check with your ADSL
Service Provider to confirm the line condition.
5.3
Power LED and Link LED light up, but the LAN LED
keeps off . (No LAN Signal)
1) Check the RJ45 Network Cable connection
2) Check your LAN Card whether it’s functioning.
5.4
Power LED and LAN LED light up, but the ADSL Link LED
keeps off. (Modem Faulty)
1) Please contact modem vendor for servicing.