PROLiNK WNR1009 Wireless-N - Manual (Page 2)

4)
If your wireless AP is secured with wireless encryption, you need to key in the
password when prompted, then click “Connect”.
It will show “Connect successfully” if the password entered is correct. Click “OK”
5)
Go back to Basic settings > You will see the SSID had been changed to your
connected wireless AP SSID > Tick “Enable Universal Repeater Mode” > You can
change the SSID of Extended Interface – this is the SSID you will see for your
WNR1009/1010 when in repeater mode. Click “ Apply Changes” > Reboot Later