AMX AMX78 User Manual
Page 7
Protected Valet Mode
You should place your system in Protected Valet Mode whenever your vehicle
is being serviced by mechanics, car wash personnel or driven by valet parking
attendants. While in the Protected Valet Mode, all alarm functions are
bypassed to prevent unauthorized or accidental arming. Remote-controlled
door lock/unlock, trunk release and all optional accessories will still operate.
To Turn on Protected Valet Mode
1. Turn the ignition key to the “ON” position or start the engine.
2. Flick the valet switch to the “ON” position.
3. The LED will turn on solid red to indicate the system is in the Protected
Valet Mode.
4. Turn the ignition key to the “OFF” position.
To Turn off Protected Valet Mode
1. Turn the ignition key to the “ON” position or start the engine.
2. Flick the valet switch to the “OFF” position.
3. The LED will turn off to indicate the system is no longer in the Protected
Valet Mode.
4. Turn the ignition key to the “OFF” position.
LED System Status Indicator
The LED on your vehicles dashboard or center console will inform you of the
system status.
LED
Status
Off
System is disarmed
On solid
In Protected Valet Mode
Slow flash
System is armed
Flashing in cycles
See “Specific Intrusion Identification” on page 6.
Rapid flash
Passive arming
Remote-Controlled Trunk Release Capability
If you have the optional Trunk Release installed, simply press the remote
control TRUNK button for 1-2 seconds to activate your vehicle electronic
trunk release. The trunk will “pop” open (may require an optional relay).
5
AMX78(3) Owner's Manual 0399