beautypg.com

Application – Bosch PMF2232 Fußsprudelbad User Manual

Page 8

background image

6

Robert Bosch Hausgeräte GmbH

en

● Skin ailments or injuries, particularly open

wounds

● Inlammation of the feet or lower legs

● Vein conditions, thrombosis or varicose

veins

● Bruises or pain in the feet, legs or joints

● TB or cancers
The appliance must not be used without
consulting a doctor in advance.
Use of the foot spa is not a substitute for
therapy carried out by a physician.

Application

General
The gentle oscillations and the bubbling
water relax muscles and reinvigorate tired
feet.
The attachments supplied pamper and
massage the feet.
A session should not last longer than 10
minutes.
The foot bath can be used with or without
water.

Sit down during use, and under no
circumstances stand up with your feet in
the spa!
The appliance is not designed to take the
full weight of the user.

Use
The appliance must not be connected to the

power supply during illing or emptying.

● Uncoil the lead and place the foot spa on

the loor in front of a chair.

● Check whether the appliance is switched

off. The rotary selector 5 must be set to
“0”.

● Fill with warm water to the

~

marking.

● Plug in the power cord.

● Sit down and place the feet in the foot

bath 1, ensuring you are in a comfortable
position.

● Select the desired level from 1­3 with the

rotary selector 5 and pamper your feet
(max. period of use approx. 10 min).

– Level 1

m

switches on the vibration

massage.

– Level 2

n

starts the bubble function,

and switches on the heating to keep the

water warm. It is not possible to heat up
cold water by this method.

– Level 3

mn

combines levels 1 and

2.

● Switch off the appliance when you have

inished bathing your feet. To switch off
the appliance, set the rotary selector 5 to
“0”.

● Remove the feet from the foot bath and

unplug the lead. Lift the appliance by the
indented grips and pour out the water
via the cutout at the front.

Tip: To ensure special relaxation and care
for the feet, a non­foaming, non­oily care
preparation can be added to the water.

Use of accessories

● Afix the desired attachment a, b or c to

the drive socket

6.

● Press down the afixed attachment lightly

with a foot. The attachment rotates.

Important: Do not prevent rotation through
excessive pressure.

● Treat the particular part of the foot with

the appropriate attachment.

– The soles of the feet can be massaged

using the massage brush a and the
massage ball attachment b.

– The “pumice stone” attachment

c

is suitable for the gentle removal of
hardened skin.

Tip: Flakes of dead skin can be readily
removed with the “pumice stone” after a
foot bath, when the skin is very soft.

PMF_2232_091204.indd 6

04.12.2009 17:03:22

This manual is related to the following products: