AEG LAVAMAT 62600 - Manual (Page 22)

Operating instructions
22
During the Washing Program
Program Progress Indicator
The program selector serves as a program progress indicator by rotating
in a clockwise direction to the end of the program.
3 In the case of the STAIN (position 1), MAIN WASH (position 2) and
QUICK WASH (position 3) programs, immediately after program start
the program selector moves to a position directly behind QUICK WASH
(position 3). The program selector then indicates the progress of the
program as usual.
Changing Settings
During the washing program you can:
– Change the spin speed
– Select o (RINSE HOLD)
– Change the temperature setting
Other settings cannot be altered.
Stopping the Program Early
0 1. Press the M (ON/OFF) button.
2. Turn the program selector clockwise to position 8 (PUMP OUT).
3. Press the M (ON/OFF) button again.
The water is pumped out.