Water filter, Start, Place 0.5 l container under milk frother – Bosch TES71151DE VeroBar AromaPro 100 Espresso-Kaffeevollautomat silber User Manual
Page 39: Change filter, Transport. lock, Factory reset

39
TES711.|.04/2012
39
en
Water filter
Before.a.new.water.filter.is.used,.it.must.be.
rinsed..
.
● To.do.this,.press.the.water.filter.firmly.
into.the.water.tank.
11.with.the.aid.of.the.
measuring.spoon.
14..Fill.the.water.tank.
with.water.up.to.the.“
max”.mark..
.
● Turn.the.knob.
6.to.select.
start
.and.
press.the.
start.button.8.
●.
Place 0.5 l container under milk
frother
start
.
● Place.a.container.with.a.capacity.of.0.5.
litres.under.the.milk.frother.
10.
.
● Press.the.
start.button.8..Water.will.now.
flow.through.the.filter.to.rinse.it.
.
● Next,.empty.the.container..The.appliance.
is.ready.to.use.once.more.
Note: Rinsing.the.filter.simultaneously.
activates.the.setting.for.the.“change.filter”.
display..
You.can.find.detailed.information.about.the.
water.filter.in.the.enclosed.filter.instructions.
The.filter.is.no.longer.effective.when.the.
Change filter
display.appears,.or.at.
the.latest.after.2.months..It.needs.to.be.
replaced.for.reasons.of.hygiene.and.so.that.
there.is.no.buildup.of.limescale.(this.could.
damage.the.appliance).
Replacement.filters.can.be.obtained.from.
retailers.(TCZ7003).or.from.customer.serv
ice.(467873)..If.no.new.filter.is.used,.turn.
the.
Water filter
.setting.to.
no
.
j
3.sec.
+
>
Note: If.the.appliance.has.not.been.used.
for.a.prolonged.period.(e.g..vacation).the.
filter.should.be.rinsed.before.the.appliance.
is.used.again..To.do.this,.simply.dispense.a.
cup.of.hot.water.
Transport. lock
.
● To.avoid.damage.from.low.temperatures.
during.transport.and.storage,.the.appli
ance.must.be.completely.emptied.first.
Information: The.appliance.must.be.ready.
for.use.and.the.water.tank
11.filled.
.
● Press.the.
start button.8..The.appliance.
automatically.empties.the.pipe.system.
and.switches.off.
.
● Empty.the.water.tank
11 and.the.drip.
tray.
24.
Factory reset
You.can.cancel.your.own.settings.and.reac
tivate.the.factory.settings.
.
● To.activate.the.factory.settings,.press.the.
start.button.8.
Note:.The.appliance.can.also.be.reset.to.
the.factory.settings.using.a.combination.of.
buttons..The.appliance.must.be.switched.
off.fully.
.
● Hold.down.the.
<
.and.
>
.buttons.
4.and.
the.on./.off.switch.
1.O / I.at.the.same.time.
for.at.least.5.seconds..Press.the.
start.
button.
8..The.factory.settings.are.now.
reactivated.
j
3.sec.
+
>
j
3.sec.
+
>