Arcam A70 - Manual (Page 12)

A70
E-12
Remote-control codes
The following table gives the IR-commands accepted by
the A70.
Power commands
Command Decimal Code
Power toggle 16–12
Power-on 16–123
Power-off 16–124
Source selection commands
Command Decimal Code
PHONO select 16–1
AV select 16–2
Tuner select 16–3
DVD select 16–4
tape select 16–5
VCR select 16–6
CD select 16–7
Aux select 16–8
Volume control commands
Command Decimal Code
Mute 16–13
Volume up 16–16
Volume down 16–17
Guarantee
Worldwide Guarantee
This entitles you to have the unit repaired free of charge, during the first two years after purchase, at
any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam
dealer or distributor. The manufacturer can take no responsibility for defects arising from accident,
misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can
they accept responsibility for damage or loss occurring during transit to or from the person claiming
under the guarantee.
The warranty covers:
Parts and labour costs for two years from the purchase date. After two years you must pay for both parts
and labour costs. The warranty does not cover transportation costs at any time.
Claims under guarantee
This equipment should be packed in the original packing and returned to the dealer from whom it was
purchased, or failing this, directly to the Arcam distributor in the country of residence.
It should be sent carriage prepaid by a reputable carrier – NOT by post. No responsibility can be
accepted for the unit whilst in transit to the dealer or distributor and customers are therefore advised to
insure the unit against loss or damage whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department,
Pembroke Avenue, Waterbeach, CAMBRIDGE,
CB5 9QR, England.
Telephone: +44 (0)1223 203200
Fax:
+44 (0)1223 863384
Email: [email protected]
Problems?
Contact your dealer in the first instance as they are there to help you. If your dealer is unable to answer
any query regarding this or any other Arcam product please contact Arcam Customer Support on
+44 (0)1223 203200 or write to us at the above address and we will do our best to help you.
On-line registration
You can register your Arcam product on line at: www.arcam.co.uk
Menu navigation commands
Command Decimal Code
Select 16–37
Enter 16–87
Speaker control commands
Command Decimal Code
Speaker 1 toggle 16–35
Speaker 2 toggle 16–39
Speaker 1 on 16–43
Speaker 1 off 16–44
Speaker 2 on 16–45
Speaker 2 off 16–46
Display control commands
Command Decimal Code
Display 16–59
Note that the A70 also responds to code 20–53 (the PLAY
command for an Arcam CD player). The A70 swiches
automatically to CD input on receiving this command.