Bosch THD2023 Heißwasserspender Filtrino FastCup - Manual (Page 16)

6
RobertBoschHausgeräteGmbH
en
Fill quantity
Theapplianceshipswithapresetill
quantityof120ml.Youcanchangethis
quantity.
Toadjusttheillquantity,proceedas
follows:
► Holddownthe temp. setbuttonforat
least5seconds.
► Theindicatorforthecurrentlysetill
quantitylashes.
► Pressthe temp. setbuttontoselectthe
desiredillquantity:
L =approx.120ml
70 °C =approx.150ml
80 °C =approx.200ml
90 °C =approx.250ml
Q =approx.300ml
► Pressthe start/stopbutton–thesetting
isnowstored.
Important: Tokeepthedispensedwater
fromoverlowing,makesurethatyouplace
asuficientlylargeglassorcupunderthe
wateroutlet.
Note:Tochangethissettingatanytime,
repeattheaboveprocedure.
Child lock
Forsafetyreasons,thisapplianceis
equippedwithachildlock.Toactivateit,
proceedasfollows:
► Pressandholdthe temp. setandstart/
stopbuttonssimultaneouslyforatleast
5seconds.TheLandPiconslightup.
Info:Whenthechildlockisactivated,only
ambientwaterisavailable.Whenyoupress
the temp. setbutton,theLlashes;all
othersettingsareblocked.
Todeactivatethechildlock,proceedas
follows:
► Pressandholdthe temp. setandstart/
stopbuttonssimultaneouslyforatleast
5seconds.ThePicongoesout.
BRITA MAXTRA water
ilter system
In models equipped with a water ilter
system, only BRITA MAXTRA water
ilter cartridges may be used.
BRITAMAXTRAcartridgescanbe
purchasedfromretailersordirectlyfrom
BoschCustomerService.(Seetheback
pagesoftheseinstructionsforcontact
information).
Theappliancecanbeusedwithorwithout
ailtercartridge.
Keepinmindthatyouwillenjoythebene-
itsofBRITAiltrationonlyifaMAXTRA
iltercartridgeisinstalledintheappliance.
Teaandcoffeealsohavemorearoma
whenpreparedwithfresh,BRITA-iltered
water.
Tousethemachinewithoutailter,simply
removetheilterholderandtheilter
cartridgeandadjustthemachinesettings
accordingly.
Important:TheFilterYes/Nosetting
controlstheilterreplacementindicator.
Changing the ilter setting
► Turntheapplianceoffwiththe on/off
switch.
► Pressandholdthe temp. setbutton.
► Turntheappliancebackonwiththe on/
offswitch–theMiconlashes.
► Pressthe start/stopbuttontoselectthe
FilterYes/Nosetting:
Yes=Mlightsup
or
No=Mdoesnotlightup
► Releasethe temp. setbutton–theset-
tingisnowstored,andthemostrecently
selectedtemperaturelightsup.
Note:Tochangethissettingatanytime,
repeattheaboveprocedure.
Aftersettingtheilterto“yes”,thesymbol
M willlightupafteracertaintimeduring
operation.TheBRITAMAXTRAilter
cartridgeisexhaustedandneedstobe
changed.