Bosch Multigetränkesystem clear white anthrazit TAS4304 - Manual (Page 31)

33
01/2013
en
Problem Possible!cause Solution
Water on the surface
under the cup stand.
Water from
condensation.
Condensation may occur and is not
a fault. Remove it by wiping with a
cloth.
The Service T DISC is
damaged or lost.
The Service T DISC is
required for the cleaning
cycle and the descaling
cycle.
Check the storage compartment
for the Service T DISC behind the
water tank.
The Service T DISC can be ordered
from Bosch customer service
(Product No. 624088). See page 166
for contact information.
T “Fill water tank” lights
up even though there is
suficient water in the
tank.
The loat in the water
tank is stuck.
Clean the water tank and ensure
that the loat can move.
' “Descale required”
lights up even though you
are using soft water.
Even soft water con­
tains small amounts of
dissolved lime.
Descale the appliance (for details
see “Descaling”).
More Customer Service information is available online at www.tassimo.com
TAS43_EU.indb 33 21.12.2012 10:51:53