Airlink APSUSB201W - Manual (Page 15)

If you want to print directly to the print server (bypassing the wireless router),
follow the steps below. You should use a wired connection to configure the
following wireless settings before unplugging the network cable from the print
server.
Step 1 Go to Configuration, Wireless and set the Connection Mode to Ad-Hoc.
Step 2 Rename the SSID of the print server or keep it as default.
Step 3 Set the desired Wireless Channel.
Step 4 Click Save.
Step 5 Click on Management and go to Wireless. Verify that the Connection Mode is Ad-Hoc and the
Link is Yes. Also verify that the SSID matches the SSID you have set.
Note: Your wireless computer may lose Internet connection if you set it to print directly to the print server.
Note: If the Link does not say Yes, click on the Refresh button until it displays Yes.