Adjusting the grinding unit, Shut off, Filter – Bosch TES50658DE VeroCafe LattePro Kaffeevollautomat Dunkles Espressobraun Dark Espresso User Manual
Page 31: No / old, Activate filter, Start calc‘n‘clean, Calc‘n‘clean, Descaling, Cleaning, Temp
27
TES506.. 06/2011
en
You can set the following:
Shut off
: Here you can set the time span
after which the appliance automatically
switches off following the last drink prepa
ration. A time between 15 minutes and 4
hours can be set. The default time is 1 hour,
but this can be shortened to save energy.
Filter
: Here you can set whether a water
ilter is being used. If a water ilter is not be
ing used, turn the setting to
No / Old
. If a
water ilter is being used, turn the setting to
Activate filter
. New water ilters have to
be rinsed before use (see “Water ilter” on
page 26).
Start Calc‘n‘Clean
: The service pro
grammes (
Calc‘n‘Clean
/
descaling
/
cleaning
) can be selected manually here.
Press the
start button (10) and run the
selected programme (see “Service Pro
grammes” on page 32).
Temp.
: The brewing temperature (
high
/
middle
/
low
) can be set here.
Language
: The display language can be
set here.
Water hardness
: The water hardness
setting can be adjusted on this appliance.
It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting for the
water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
Dip the test strip briely in water, gently
shake off any drips, and check the result
after one minute.
Level
Water hardness
German (°dH)
French (°fH)
1
2
3
4
17
814
1521
2230
113
1425
2638
3954
Drink counter
: This displays how many
drinks have been dispensed since the appli
ance was irst put into operation.
Adjusting the grinding
unit
The rotary selector (3) adjusts the grind set
tings from coarse to ine.
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged. Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
the rotary selector (3) from ine (
a: Turn
anticlockwise) to coarse (
b: Turn clock
wise) as required.
a
b
Note: The new setting will not become ap
parent until after the second cup of coffee.
Tip: For dark roast coffee beans, choose a
iner grind, for lighter beans a coarser grind.
TES506_1DE.indb 27
16.06.2011 11:46:59