Perma pure llc – Perma Pure SDS-Series 4C-D201_-D202 User Manual

Page 9

Text mode
Original mode

PERMA PURE LLC

SDS™-Series User’s Manual
Doc. #219: Revision: 000

Page 9 of 12

Dual stream application (Refer to figure 5)
1. Remove the crossover tube.
2. Connect the sample stream 1 supply line to the ¼” tube compression fitting labeled

“Sample gas inlet”.

3. Connect the sample stream 1 outlet line to the 1/4” tube compression fitting B.
4. Connect the sample stream 2 supply line to fitting A.
5. Connect the sample stream 2 outlet line to fitting labeled “Sample gas outlet”.

Figure 5– SDS-D202 Sample Connections

Instrument air connections – all models

1. Connect an instrument air line to the ¼” FNPT labeled “Instrument Air Inlet” in figure 6.

NOTE: Instrument air must be oil-free and between 30-150 psig.