Audiovox MMD92 - Manual (Page 6)

6
TRIM RING INSTALLATION:
1) The trim ring is attached to the video monitor
using the perimeter screw bosses. It is important
that the screws used in this installation are not
overtightened, and that the video monitor and trim
ring are mounted in such a way that the assem-
bly does not distort (or bend) when the mounting
screws are tightened. The trim ring MUST be
screwed to the unit. (Refer figure 1)
Figure 2
Trim Ring
Figure 3
2) The MMD92 is now ready to be mounted in the
vehicle. (Refer figure 2)
Figure 1
Figure 2