beautypg.com

Rear panel – Asus 48x/16x/48x CD-RW Drive CRW-4816A User Manual

Page 15

background image

ASUS CRW-4816A User’s Manual

15

Rear Panel

1. Digital audio connector

This connector is for a digital signal output cable.

2. Analog audio connector

This connector is for an analog signal output cable.

3. Jumper terminals

These pins allow you to select either Master, Slave, or Cable Select
mode for the CD-ROM device.

4. IDE connector

This connector is for a 40-pin IDE cable to connect the drive to the IDE
interface on the motherboard.

5. Power connector

This DC connector is for a 4-pin power cable from the system power
supply.

NOTE: The jumper pins on the leftmost part of the rear panel are
factory test pins. DO NOT cover these pins with jumper blocks.

1

3

2

4

5

See also other documents in the category Asus Hardware: