Control Company 3422 CALCULATOR - Manual

Traceable ® is a registered trademark of Control Company ©2009 Control Company. 92-3422-00 Rev. 1 031909
FEATURES
Solar Calculator with battery backup
Pen with Pen Holder
Traceable® Timer
CALCULATOR KEY FUNCTIONS
ON/CE
Press to turn the calculator on. When pressed during operation, press to
clear an incorrectly entered number. Clears only the most recent entry.
ON/C
Press to turn the calculator on. When pressed during operation, clears the
display to zero.
CE
Press to clear an incorrectly entered number. Clears only the most recent
entry.
OFF
Press to turn the calculator off.
The memory is cleared when the calculator is turned off.
Numerals (0-9)
Use to enter numbers.
•
Press to enter a decimal point.
+/−
Press to change the value of the displayed number from positive to negative,
or negative to positive.
+
Press to add entries.
−
Press to subtract entries.
X
Press to multiply entries.
%
Press to calculate a percentage.
=
Press to complete the arithmetic calculation.
÷
Press to divide entries.
√
Square Root key: Press √ to calculate the square root of the displayed
number.
M+
Memory Plus key: Press M+ to add the number being displayed to the value
stored in memory.
M-
Memory Minus key: Press M- to subtract the number being displayed from
the value stored in memory.
MR
Memory Recall key: Press MR to display contents of memory. Memory
remains unchanged after key operation.
MC
Memory Clear key: The first press of the MC key displays the value stored in
memory. The second successive press of the MC key clears the memory.
CALCULATOR DISPLAY MESSAGES
“MINUS“ – indicates the displayed number is a negative.
“MEMORY” – indicates a number is stored in memory.
“ERROR” – indicates the calculated value is too large/small to be displayed.
WITH TRACEABLE TIMER
SPECIFICATIONS
Countdown:
99 hours, 59 minutes, 59 seconds
Resolution: 1 second
Count-up: 99 hours, 59 minutes, 59 seconds
Resolution: 1 second
BUTTONS
H
- Hours M - Minutes S – Seconds
C - Clear S/S - Start/Stop
CLEARING THE DISPLAY
If the timer is running, press the S/S button to stop the timer. To clear the display
to zero, press the C button. Clearing the display will also clear the previous
countdown time from memory.
COUNTDOWN ALARM TIMING
1. Clear the display to zero.
2. Press the H button to advance the hours digits. Press the M button to
advance the minutes digits. Press the S button to advance the seconds
digits. Press and hold the H, M, or S button to rapidly advance the
display.
3. Once the desired time is on the display, press the S/S button to begin
countdown timing.
4. When the timer reaches zero, an alarm will sound and the timer will begin
counting up.
The alarm will sound for one minute and then turn off automatically to preserve
battery life while the timer continues counting up.
While the alarm is sounding, pressing any button will silence the alarm and stop
the count-up timing. After one minute, pressing the S/S button will stop the
count-up timing.
CALCULATOR WITH CLIPBOARD /TRACEABLE® TIMER INSTRUCTIONS