AT&T 962 - Manual (Page 27)

25
Repeat Calls
You can choose whether you want repeat calls listed separately, or each
repeat call combined with the original call (for unreviewed calls only).
Combined calls include the repeat count, the time/date reflects the most
recent call, and the call history is reordered (if necessary).
1 Press O, then select CALL ID and press OK until you reach
the Repeat Calls screen.
2 Use + or - to select one of the options shown below:
COMBINED ENTRY repeat call is combined with the original
SEPARATE ENTRIES repeat call is listed separately
3 Use the softkey to select OK when your selection is flashing.
Display Dial
As you review calls in history, you can dial a displayed phone number.
If the call information came from your Home Area Code (the one you
programmed at installation), the screen displays only the seven-digit
number (without an area code). When you use Display Dial, the system
dials the seven displayed digits. (See INSTALLATION for instructions to
program up to four other local area codes.)
1 Locate the number in call history.
2 Press and release d.The speakerphone is automatically
activated.You can lift the handset before or after d is
pressed and the number is dialed.
If you are dialing a long-distance call, the leading “1” will automatically
be pre-dialed. The screen shows the number being called.
CALLER ID OPERATION