Nova-Tech LBK Series - Manual (Page 15)

© Adam Equipment Company 2009
12
6.4 PARTS COUNTING FUNCTION
• Press [Tare] to switch on or off the part counting function.
• "OFF PCS" :part counting function is off.
• "ON PCS" : part counting function is on.
• Press [Unit] key to confirm the setting and look through the next
setting. It would enter the percentage weighing when it shows "On
PEr " or "OFF PEr".
6.5 PERCENTAGE WEIGHING FUNCTION
• Press [Tare] key to switch on or off this function.
• "OFF PEr ":the percentage function is off.
• "ON PEr”: the percentage function if on.
• Press [Unit] key to confirm the setting and look through the next
setting. It enters user’s simple cal function when it displays "On CAL"
or "OFF CAL".
6.6 USER CALIBRATION FUNCTION
• Press [Tare] key to switch on or off the function.
• "OFF CAL" : the function is off.
• "ON CAL" : the function is on, when the user cal function is off in
weighing mode, press [Func] key to overleap this function and move to
the next setting.
• Press [Unit] key to confirm the setting and enter the next setting. It
enters unit setting when it shows "On g " or "OFF g".