Nova-Tech WBZ..aM Series - Manual (Page 6)

© Adam Equipment Company 2010 4
3.0 INSTALLATION
3.1 LOCATING
• The scales should not be placed in a location
that will reduce the accuracy.
• Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning vents.
• Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
• Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
• Do not place near vibrating machinery.
• Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
• Keep the scales clean. Do not stack material
on the scales when they are not in use.
3.2 UNPACKING
Inside the box you will find-
The Scale
Stainless Steel Pan
Power supply Module
An Instruction manual