Installation – AEG 52840 User Manual
Page 7
7
Do not use your washing machine to wash articles with whalebones, material
without hems or torn material.
Always unplug the appliance and turn off the water supply after use, clean
and maintenance.
Under no circumstances should you attempt to repair the machine yourself.
Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Centre. Always insist on genuine
spare parts.
Installation
This appliance is designed for domestic use. It must not be used for purposes
other than those for which it was designed.
When unpacking the appliance, check that it is not damaged. If in doubt, do
not use it and contact the Service Centre.
All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if this is not adhered to. See relevant
section in the user manual.
After having installed the appliance, check that it is not pressing or standing on
its electrical supply cable, inlet hose and drain hose.
If the machine is situated on a carpeted floor, please adjust the feet in order to
allow air to circulate freely
Always be sure, that there is no water leakage from hoses and their connections
after the installation.
If the appliance is installed in a location subject to frost, please read the
“d
daan
ng
geerrss o
off ffrreeeezziin
ng
g”chapter.
Any plumbing work required to install this appliance should be carried out by a
qualified plumber or competent person.
Any electrical work required to install this appliance should be carried out by a
qualified electrician or competent person.
Safety information
192999930.qxd 6/19/2008 1:35 PM Page 7