2 hardware installation – Airlink101 APSUSB2 User Manual
Page 4
3
2 Hardware Installation
2.1 Connecting the Print Server
Warning:
Only a USB printer may be connected to the USB port of the Print Server.
Connecting any other USB device to the Print Server may damage the Print Server.
Note:
Do not plug the power cord to the Print Server until you have reached
Step 4
of
this section.
Step 1
Connect one end of the Ethernet cable to the RJ-45 port of the Print Server and
attach the other end of the cable to a router.
Step 2
Make sure all the printers are powered OFF, then connect one end of the printer
cable to the printer port of the Print Server and attach the other end of the cable to the
printer port of the printer.
Step 3
Power ON the printer(s).
Step 4
Plug one end of the power cord into the Print Server and the other end into an
electrical outlet.