Diamond Products WSE1217 - Manual (Page 15)

TYROLIT Hydrostress AG
Page 15 Wall saw WSE1217 «««
Saw blades
Saw blades
Parameter Value
Saw blade max. Ø 48”
Fully detachable saw blade Ø 32”
Blade holder Ø 1”
Blade fl ange mounting at wall saw Quick-release fl ange ST
Saw blade fi xing on blade fl ange
(also for fl ush cuts) 6 countersunk head screws
reference circle 3.5 inch
Blade cover mounting on blade fl ange 1 hexagonal nut
Cutting depth Ø 26” 9.194 inch
Ø 32” 12.803 inch
(Ø 36”) (13.993 inch)
Ø 42” 17.643 inch
Ø 48” 20.796 inch
Circumferential speed 125 ft/s
Lubricants, fl uids and sealants
Lubricants, fl uids and sealants
Parameter Value
Gear oil (swivel arm) Klüber EG 4 (TYROLIT No. 10981362)
Lubricating grease (lock unit) Penetration 265 to 295
NLGI 2
Lubricating grease (swivel gear) Penetration 400 to 430
NLGI 00
Connectable control units
The wall saw must only be operated with the coordinated control units from TYROLIT Hydros-
tress.
Control unit
Parameter Type
Control unit WSE1217 ««« ( Ш 26” / Ш 32” / Ш 42” / Ш8”)
Water connection
Parameter Value
Pressure min. 29 psi / max. 87 psi
Quantity At least 1,05 gpm
Max. temperature 77 °F
5.8
5.9
5.10