Diamond Products CC8000 - Manual (Page 7)

PITCH BRAKE HAS NO PRESSURE.
1) Confirm that the quick disconnects are firmly attached.
2) Confirm that the wires from the on/off buttons to solenoid are secure.
ROLL MOTION “CHATTERS” OR “BOUNCES”.
This is most likely to occur when the carriage is extended to the curb side
and the roll motion is down (or clockwise from the drivers seat). This is
because the overhung weight is trying to drop faster than flow thru the lock
valve will allow. This can be reduced or eliminated by:
1) Move the carriage back toward the street side, thus reducing the
overhung load.
2) Carefully feather the roll motion control stick to force slow steady
motion.
PART NUMBER 1800748
7