Diamond Products CC21 User Manual
Page 6
WARNING!
Spinning the blade faster than the manufacturer’s recommended
speed can damage the blade and cause serious personal injury.
Some manufacturers, including Diamond Products, mark the
maximum safe RPM on the blade.
HYDRAULIC SYSTEM
Your CC21 hydraulic hand saw is designed to operate from a separate hydraulic
power unit providing either 10 to 14 gpm at 2500 psi (1.27 CI Motor) or 12 to 17 gpm at
2500 psi (1.58 CI Motor).
MAXIMUM CUTTING DEPTH
The CC21 hydraulic hand saw will cut to within 2 1/8” of the blade center. The
maximum depth of cut is 7-7/8”.
See also other documents in the category Diamond Products Power saws:
- CG-1 Mini Groover (32 pages)
- CG-2 Mini Groover (56 pages)
- CC110-DC-SS (28 pages)
- CC110D-SS (40 pages)
- CC110D-DC (44 pages)
- CC155 (12 pages)
- CC155 (28 pages)
- CC1100 (16 pages)
- CC1200 (8 pages)
- CC1300XL (38 pages)
- CC1300XL (Gas) (24 pages)
- CC1300XL (Electric) (40 pages)
- CC1507E (20 pages)
- CC1800XL (Electric) (52 pages)
- CC1800XL (Gas) (44 pages)
- CC1800XL (8 pages)
- CC2500 (Gas) (56 pages)
- CC2500 (Electric) (60 pages)
- CC3500J (68 pages)
- CC3500E (Electric) (68 pages)
- CC3500 (Gas) (68 pages)
- CC3535 (64 pages)
- CC3728 (80 pages)
- CC3700 (40 pages)
- CC3500 (4 pages)
- CC3700E (84 pages)
- CC3700E-3 Speed (72 pages)
- CC3730TE (68 pages)
- CC4120 (60 pages)
- CC4144D (36 pages)
- CC4144D (64 pages)
- CC4144D-XL (60 pages)
- CC4144D (3 Speed) (68 pages)
- CC6160D (36 pages)
- CC6500 (36 pages)
- CC2700 (4 pages)
- CC6540E (76 pages)
- CC6550XLS (76 pages)
- CC6550XLS-3 Speed (72 pages)
- CC6560XLS (88 pages)
- CC6560XLT (76 pages)
- CC6560XL (28 pages)
- CC6566 (48 pages)
- CC6566 (84 pages)
- CC6566-3 speed (80 pages)